Installation; Antenna Settings - Xoro HRS9190 Quick Start Manual

4. Installation

You should install the receiver when powering on your product for the first time after
purchase.
The default password is 0000. If you have forgotten your password, please contact
your local product distributor.
4.1 Powering On
1. Connect the power cord of the product to a wall outlet.
2. Ensure the ON/OFF switch at the rear of the product is switched to ON.
3. Power on by pressing the STANDBY button on the remote control or the
STANDBY button at the front of the product.

4.2 Antenna Settings

Antenna Settings allows you to configure the antenna setting parameters.
Menu->INTALLATION->Antenna Settings
1. Satellite: Highlight the
satellite you want to search.
2. Transponder (TP for short):
Press the VOL+/VOL- button to
change the TP.
3. Tuner: Press the
VOL+/VOL- button to change
the tuner.
4. LNB Type: Press the
VOL+/VOL- button to change the LNB frequency.
5. LNB Power: Press the VOL+/VOL- button to select the required LNB power.
ENG 7