Cleaning the stylus
Cleaning the decks A and B heads
From time to time, the stylus must be checked for dust particles
To ensure playback and recording with good-quality
sound, use cotton
Cleaning is best carried out with a small very soft brush.
swab to clean the heads, pinch rollers and capstans of the decks after
about every 10 hours of use.
If the dirt persists, soak the swab in a little methylated
spirit or head
Aft~r a long period of use or when an inferior sound is obtained, the stylus
cleaning fluid and then clean.
be replaced with a new one. To remove the stylus
assembly, pull it downwards
gently. To mount the new one, re-assemble
in reverse order.
Please see the label on the turntable panel to find the stylus number.
Use a soft cloth to remove dirt on the main unit.
If the dirt persists,
dip a soft cloth into a diluted
detergent, wring it out, wipe away the dirt, and then take up any moisture
with a dry cloth.
Do not use benzene, thinner or alcohol since they will mar the finish of the