Sanyo DC-X850 Instruction Manual page 7

Skip play
To skip to track 6 while track 3 is playing, press the F/ ›~ button
repeatedly until "06 appears in TRACK on the display.
To skip back to track 3 while track 6 is playing, press the l<< /4< button
repeatedly until "03 appears.
Search (forward/reverse)
If the F/ N or !44/4< button is pressed during play, the player will
search at high speed in the forward or reverse direction while the button
is being pressed. When the button is released, normal play will continue.
Introscan
In the stop mode, press the INTRO button to play the first 10 seconds of
each track. "INTRO appears on the display.
Press the INTRO button again to return to normal play.
Random play
1. In the stop mode, press the RANDOM button. "RANDOM" appears on
the display.
Note:
If "RANDOM" is blinking, the programmed tracks are retained in
memory and random function cannot be set.
To set random function, press the MEMORY button, then the STOP
to clear the programme. Press the RANDOM button again.
2. Press the PLAY/PAUSE button to begin random play. The player will
automatically select and play tracks on the disc at random.
Press the RANDOM button again to return to normal play.
If the RANDOM button is pressed during normal play, random play will
start with the next track on the disc.
Repeat play
Before or during play, press the REPEAT button repeatedly to select the
desired repeat mode in the following sequence. The selected repeat mode
is shown on the display.
r
REPEAT: Repeat all tracks on the disc
i
REPEAT (blinking): Repeat one track
II
L
None: Normal play mode
Time display selection
Press the TIME button during normal play. The display changes in the
following sequence:
[
Remaining time for the entire disc
i
Elapsed time for the current track
PROGRAMMED PLAY
Up to 20 selections on a disc can be programmed for play in any order.
First, select "CD and load the disc that you want to programme.
- The tracks must be programmed in the stop mode.
- The same track can be programmed more than once.
- If the OPEN/CLOSE button is pressed, the function is changed or the
unit is turned off, the programme is cleared.
Example:
To programme tracks 5 and 12
1. Press the MEMORY button.
(When using the remote control)
2. Press the 5 button to programme track 5.
,1,
M:B
P-02 o TRACK
L
I
3. Press the +1 O button, then 2 (within 5 seconds) to programme track
'2"-
o
\l/
P-03 'L(W"
(When using the controls on the main unit)
2.
3.
4.
5.
Press the -/ Plor144 /<+ button to select track 5, then press the
MEMORY button within 3 seconds to programme the track.
Press the F>/ FM or ~< /4< button to select track 12, then press
the MEMORY button within 3 seconds.
Note:
If the next step is not taken within 10 seconds in steps 1 -3,
"MEMORY" disappears and the programming mode is cancelled.
Press the MEMORY button to continue.
Allow several seconds to elapse. The original display returns.
More selections can be programmed in the same way.
Press the MEMORY button. "TRACK" and "MEMORY" blink on the
display. While "TRACK and "MEMORY" are blinking, press the
PLAY/PAUSE button to start the programmed play.
t ,
MEMORY
00:01
'RACK
05
I
I
When all programmed selections have played, the player stops
automatically.
The programme contents are retained in memory.
Up to 20 selections can be programmed. If you tray to enter more
selections, the display indicates still "P-20 and programming ends.
The player will enter the checking or changing programme mode.
Note:
If the STOP button is pressed in the programming mode ("TRACK and
"MEMORY" are blinking), the programme is cleared.
Checking the programme
Each time the MEMORY button is pressed in the stop mode, the pro-
grammed details sequentially appear on the display.
Changing a programme
To add a new selection
to a programme:
1. In the stop mode, press the MEMORY button repeatedly until "00"
is displayed in TRACK on the display.
2. Select a track number as explained above.
To change a selection:
1. In the stop mode, press the MEMORY button repeatedly until the
selection to be replaced is displayed.
2. Select a track number as explained above.
Note:
Programmed details cannot be partially deleted or inserted.
Clearing the memory
Press the MEMORY button, then the STOP.
-6-