is not disconnected
from the mains
Do not connect
the mains lead to an AC outlet until all connections
lead is unplugged
from the AC outlet.
have been made.
R ch speaker
*..-..~- . .:,
FM outdoor aerial
L ch speaker
FM indoor aerial
To an AC outlet
When connecting the speakers, make sure that (+) and (–) polarities are
Connect leads (not supplied) from the audio output sockets of a video
matched properly. Otherwise, the sound may appear to be lacking in the
to the VIDEO sockets.
bass range and in stability.
Connect the speaker wire with the stripe to the red terminal (+) and the
other wire to the black terminal (–).
Connect stereo headphones
to the PHONES socket for
monitoring or for private listening. The speakers are automatically
nected when headphones
The FM indoor aerial is sufficient to receive most local FM broadcasts and
should be connected to the EXT. ANT. terminal. Extend the aerial wire as
straight as possible and, while listening to the sound from the system,
secure it in a position which yields minimal distortion and noise.
In fringe areas or where reception is distorted or noisy, an FM outdoor
aerial (not supplied) should be connected instead of the indoor aerial. The
terminals will accept 75-ohm coaxial cable. Consult your dealer.
To minimize noise, the speaker, mains and any other leads should not
come close to the FM indoor or outdoor aerial lead. Do not place the aerial
lead close to the system.