Table of Contents
Advertisement
G-SPEED eS PRO INSTALLATION GUIDE
GUIDE
Attach the other end of the mini-SAS cable to Port 1 (leftmost port)
2.
GUIDE Guide
on the G-Tech RAID controller as shown below.
PORT 1
Attach the power cord to the back of G-SPEED eS PRO and
3.
connect the other end to AC power.
Power on G-SPEED eS PRO.
4.
8.3 Loading the G-Tech PCIe RAID Controller Software
1. Double-click on the G-SPEED eS PRO icon located in the
"Manuals-Drivers" folder on the included CD as shown below.
2. Double-click on the "G-Tech RAID Controller" installer package as
shown below.
Check for software updates at http://www.g-technology.com/Support/
If you are upgrading software you must un-install the previous
version first. See section 8.4 for details
The following window will appear. Follow the
3.
instructions to load the software.
Page 7
Advertisement
Table of Contents
