Table of Contents
Advertisement
G-SPEED eS PRO INSTALLATION GUIDE
GUIDE
A.4 Physical Device Information:
GUIDE Guide
1. Location: Shows the location of disks attached to the controller
2. Model: Displays the drive model and serial number of disks currently
attached to the controller.
3. Capacity: Displays the advertised capacity of the disks currently
attached to the controller.
4. Max Free: Displays the maximum free capacity of the disks currently
attached to the controller.
5. Rescan: Rescans the mini-SAS bus to detect any new devices
attached.
6. Beeper Mute: Mutes audible beeper.
NOTE: Beeper will sound when a drive fails or an array is disconnected from
the system without first selecting "Unplug" in the Array Maintenance menu.
Appendix A.4: Settings
1.
Settings:
System:
1. SAF-TE
Config
File:
2. Audible Alarm:
Enables or disables the audible
alarm. Default = Enabled.
3. Staggered Spinup: Not currently supported. Default =
Disabled.
4. Spin down idle disk: Not currently supported. Default
= Disabled.
5. Rebuild Priority: Default = Medium
6. Auto Rebuild: Enables or disables the auto-rebuild
feature. When enabled, a critical RAID 1, 3, 5 or RAID
6 array will automatically rebuild when a new drive is
inserted. See Section 12. Default = Enabled.
7. Continue Rebuilding on Error: Default = Disabled
Not
currently
supported.
Page 21
Advertisement
Table of Contents
