Table of Contents
Advertisement
G-SPEED eS PRO INSTALLATION GUIDE
GUIDE
8. INIT13 Support: Default = Enabled.
GUIDE Guide
9. NCQ: Default = Enabled.
10. Adapter Mode: Default = RAID adapter mode.
2. Settings:
User:
Used to change the GUI password. Default = "0000"
3. Settings:
SNMP:
Not currently supported.
4. Settings:
Network:
Enables G-SPEED eS Pro to be remotely monitored and
configured. Attach a network cable to the ethernet connector on the
G-Tech RAID controller and and restart your Mac. Enter the IP
address in any web browser to access the web GUI.
5. Settings:
Email:
Enter
your
email
information
mail notification in the event of a fault with G-SPEED eS Pro.
6. Settings:
NTP:
Not currently supported.
Appendix A.5: Drive Status
Displays the status of all connected hard drives including detailed
SMART data. The HDD Temperature Threshold adjusts the
threshold of the hard drive temperature to trigger a warning email.
Default is 140°F, and should not be changed.
and
password
to
enable
Page 22
Advertisement
Table of Contents
