Calibrate; Recalibrating The React - React nomadio User Manual

Calibrate

Recalibrating the React

Use the navigation controls to recalibrate the React as follows:
1. Access the top function menu from the
driving screen.
2. Navigate to the Controller Setup menu.
3. Navigate to and activate Calibrate.
4. At the confirmation screen:
9. Select Yes to recalibrate
10. Select No to cancel the operation
5. Confirm your selection.
6. Perform the calibration routine by following the on-screen commands. Only move one control at a time, as directed by the
prompts, leave the other control centered in its hands-off position.
For best results, pull the trigger then gently release it before starting calibration. After calibrating the
brake travel, gently release the trigger. This will ensure that any mechanical dead zone in the trigger is
properly detected.
This function allows you to recalibrate the React
steering and throttle controls. It does not change
any of the steering or throttle settings that are
stored in the model profiles.
or
or
or
then
then