Changing The Throttle Speed; Interaction With Other Settings - React nomadio User Manual

Changing the Throttle Speed

Use the navigation controls to change the steering servo type as follows:
1. Access the top function menu from
the driving screen.
2. Navigate to the Steering (Ch1) menu.
3. Navigate to Throttle Speed.
4. Change the values.

Interaction with other Settings

Servo Speed is applied after Expo. The trigger levels refer to the curved input value.
ABS is applied after Brake Speed, so Brake Speed can limit how quickly the brake input moves to the
ABS Active region, but once there ABS pulses happen at full speed.
Servo Speed is applied after AutoStart, so if the AutoStart Level is set higher than the Throttle Speed
Trigger, the servo movement will be slowed.
Idle Up only takes effect when the trigger is centered. Throttle Speed can slow down the return to
center, and therefore slow down Idle Up activation. Once Idle Up is started, the servo will jump to the
set position.
or
or
Value
Throttle
Speed
or
Brake
Speed
Throttle
Trigger
Brake
Trigger
then
Description
The amount of limiting applied to servo throttle
motion once the trigger amount has been exceeded.
The amount of limiting applied to servo brake
motion once the trigger amount has been exceeded.
The percentage of full throttle range that will be
limited.
The percentage of full braking range that will be
limited.