Channel 3 / 4 Servo Type; Changing The Channel 3 / 4 Servo Type - React nomadio User Manual

Channel 3 / 4 Servo Type

Changing the Channel 3 / 4 Servo Type

Use the navigation controls to change the shift servo type as follows:
1. Access the top function menu from
the driving screen.
2. Navigate to the Channel 3 or
Channel 4 menu.
3. Navigate to Servo Type.
4. Change the value.
Servo type lets you select the type of servo
(analog or digital) in the vehicle. Analog servos
are sent signals at 50 frames/sec, while Digital
servos are sent signals at 100 frames/sec.
If you are running an electric car with an ESC, it
may perform better with the digital setting. Some
ESCs may not operate at all with the higher frame
rate. Try both settings and choose the best
performance.
or
or
Value
Analog
or
Digital
then
Description
Shift servo is analog.
Shift servo is digital.