Throttle Speed - React nomadio User Manual

Throttle Speed

Throttle speed allows you to limit the maximum
speed that the throttle servo will be driven to
match your movements on the trigger. There are
four parameters that can be adjusted to precisely
set up your limiting.
Throttle Speed determines the percentage of full
speed that is applied to the throttle movements
that are above the throttle trigger setting. 100 is
maximum servo movement rate. 1 is minimum
rate. Default is 100 (full speed).
Brake Speed determines the percentage of full
speed that is applied to braking movements that
are above the trigger setting. 100 is maximum
servo movement rate. 1 is minimum rate. Default
is 100 (full speed).
Throttle Trigger sets the minimum amount of
control input before the speed limiter becomes
active. At 0%, limiting is always active (input is
always >= 0%). At 50%, limiting is only active if
the throttle is on half way or more.
Brake Trigger sets the minimum amount of
control input before the speed limiter becomes
active. At 0%, limiting is always active (input is
always >= 0%). At 50%, limiting is only active if
the brake is on half way or more.