Tank Mode; Activating / Deactivating Tank Mode; Using The Timer Function - React nomadio User Manual

Tank Mode

Activating / Deactivating Tank Mode

Use the navigation controls to select the active model as follows:
1. Access the top function menu from the driving screen.
2. Navigate to the Advanced menu.
3. Navigate to Tank Mode.
4. Select On or Off.

Using The Timer Function

Use the Timer menu to configure, view on the drive screen to the left of Tx Bat. Default keys are:
: Start/pause timers
: Reset timers
: Start a new lap
: Restart pit timer countdown
These keys only work on the drive screen, not in the menus. Other keys configurations
can be set up with RC Desktop using "softkeys".
The Tank mode combines steering and throttle
inputs to left-side and right-side drive. Tank
mode Uses Ch1 as right drive servo and Ch2 as
left drive servo. Throttle inputs affect both
outputs equally. Steering input increases output on
one side and decreases output on the other side.
Mixing is applied after all other settings from both
Ch1 and Ch2 (ABS, Autostart, both expo settings,
etc). Servo travel is limited by Throttle/Brake
endpoints.
or
or
or
then