Creating Sip Extension - Polycom SoundStation IP 4000 Manual

The Admission Control Bandwidth defines the bandwidth available to and from the site. This is
important as SIP endpoints may be counted against the site bandwidth. See the ShoreTel Planning and
Installation Guide for more information about this.
ShoreTel 8 now adds 10 CODECs by default. These CODECs can be grouped as "Codec Lists" and
defined in the sites page for "Inter-site" and "Intra-site" calls. See the ShoreTel 8 Server Release Notes
for more information. The default settings will work properly with Comdasys.

Creating SIP Extension

You need to create a user extension for a handset on Comdasys. This is accomplished from ShoreWare
Director by selecting "Administration" followed by "Users...," then "Individual Users." This action
will bring up the "Individual Users" screen at the top of the page. To the right of "Add new user at
site:," select the site you wish to create the user in (from the drop down menu), and select "Go" (Figure
9).
Figure 9 – Trunk Groups Settings
This action brings up the "Users" "Edit Users" screen (Figure 10).
960 Stewart Drive Sunnyvale, CA 94085 USA Phone +1.408.331.3300 +1.877.80SHORE Fax +1.408.331.3333 www.ShoreTel.com
- 16 -