NovaStar MCTRL660 User Manual page 6

network interfaces. For details, see precautions for screen setting
c) Set the alignment of the screen. Pay attention to precautions for screen setting iii), iv) and v)
below.
d) Set the resolution of the video source.
Precautions for screen setting:
i. If the number of network interfaces with
loads is n (n≤4), the first n-1 network
interfaces must have the same number of
cabinets, which must also be an integral
multiple of the number of cabinet rows or
columns and be greater than or equal to
the number of cabinets for the nth
network interface.
ii. In the case of special-shaped cabinets, different cabinet sizes and special-shaped screen, the
NovaLCT-Mars software is required to be connected to configure the screen.
iii. During connection setting, you can rotate the button to see the effects of different connections on
the screen in real time. If you are satisfied with the connection, you must press the button to save
the setting. You can press the return key to exit from the current operation.
Example:
For example, if network interface 1, network interface
2, network interface 3 have loads, network interface
1 and network interface 2 must have the same
number of cabinets, which must also be an integral
multiple of the number of cabinet rows or columns.
Therefore, you need only to set cabinet out1 num
according to the actual situation when setting the
screen. The number of receiving cards for network
interface 3 must be smaller than or equal to cabinet
out1 num
i).