Panasonic BB-GT1500C Operating Instructions Manual page 29

Static setup N
If your local network does not use a
DHCP server for automatic IP address
assignments, turn the DHCP connection
mode off first. Then set the static IP
address and other Internet connection
settings corresponding to your local
network.
Turning the DHCP connection mode
off:
1
{MENU} i {#}{5}{0}{0}
2
{V}/{^}: "Off"
3
{SAVE} i {OFF}
Setting the static IP address and
other settings:
1
{MENU} i {#}{5}{0}{1}
2
Set the IP address and other
settings.
L Push the joystick down {V} or up
{^} to move between the
following 5 items.
Enter the IP address in
IP
this data field.
address
L Set 4 numbers (0-
255) separated by
periods such as
"192.168.0.253".
Enter the subnet mask
Subnet
in this data field.
mask
L Set 4 numbers (0-
255) separated by
periods such as
"255.255.255.0".
Enter the default
Default
gateway address in this
gateway
data field.
L Set 4 numbers (0-
255) separated by
periods such as
"192.168.0.1".
For product assistance, visit www.globarange.com
*1
*1
*1
For A assistance, visit www.joip.com
Enter the DNS (Domain
DNS1
(DNS Name System) server
server 1) addresses in each data
field.
DNS2
L Set 4 numbers (0-
(DNS
255) separated by
server 2)
periods such as
"172.23.0.100".
L To move the cursor, push the
joystick right {>} or left {<}.
To correct digits, press {CLEAR}.
*1 There are some restrictions on these
entries. For example, "0.0.0.0" and
"255.255.255.255" are not available.
3
{SAVE} i {OFF}
L Wait until the STATUS indicator
on the base unit turns green.
When the STATUS indicator
lights in green, the setting is
complete. Confirm your A
number (page 30).
L When the STATUS indicator does
not light in green even if you wait
for a few minutes, see page 23.
Preparation
*1
29