Table of Contents
Advertisement
Answering System
Remote operation
Using a touch tone phone, you can call
your phone number from outside and
access the unit to listen to messages.
The unit's voice guidance prompts you to
press certain dial keys to perform
different operations.
Important:
L In order to operate the answering
system remotely, you must first set a
remote code (page 64). This code
must be entered each time you
operate the answering system
remotely.
L To call the unit via the IP line from a
landline phone or cellular phone, you
need an additional phone number you
subscribed at www.joip.com other
than the A number (page 4).
Using the answering system
remotely
1
Dial your phone number from a
touch tone phone.
2
After the greeting message starts,
enter your remote code (page 64).
L The unit plays back new
messages.
L The voice guidance informs you of
the available commands. The
announcements are different
depending on the voice guidance
language settings (page 27).
3
Control the unit using remote
commands (page 63).
4
When finished, hang up.
Note:
L When you press a key, press firmly.
62
For product assistance, visit www.globarange.com
For A assistance, visit www.joip.com
Voice guidance
During remote operation, the unit's voice
guidance starts and prompts you to
press {1} to perform a specific
operation, or press {2} to listen to more
available operations. Operations are
presented by voice guidance in the
following order:
– Play back all messages
– Play back new messages
– Record your message
– Erase all messages
– Record your greeting message
Note:
L If you do not press any dial keys within
10 seconds after a voice guidance
prompt, the unit disconnects your call.
Advertisement
Table of Contents
