Table of Contents
Advertisement
Installation
Connecting to a landline and the Internet (IP line)
Connect the base unit to a broadband router or modem with a built-in router.
*1 Computer is not required for setup or making/answering internet calls.
TEL LAN
2
Telephone
line cord
1
Connect the included Ethernet cable until it clicks into the "LAN" port on the base
unit and unused Ethernet (LAN) port on your router or modem with a built-in
router.
2
Connect the included telephone line cord until it clicks into the "TEL" port on the
base unit and telephone line jack.
3
Connect the included AC adaptor to the base unit by pushing the plug firmly, then
plug the other end into the power outlet.
L Use only the included Panasonic AC adaptor PQLV203.
L The STATUS indicator on the base unit lights in red for about 3 seconds (page
22).
For product assistance, visit www.globarange.com
AC adaptor
Ethernet cable
1
Computer
(Optional) *1
For A assistance, visit www.joip.com
Press
plug firmly.
Hook
(120 V AC, 60 Hz)
3
Router
To single-line
telephone jack
(RJ11C)
Preparation
Internet
Cable or
DSL modem
17
Advertisement
Table of Contents
