Listening To Messages Using The Handset - Panasonic BB-GT1500C Operating Instructions Manual

Answering System
Operating the answering
system
Key Operation
{^} or {V} Adjust the speaker
volume
(during playback)
Repeat a message
{<}
(during playback)
Skip a message
{>}
(during playback)
Pause a message
{STOP}
– To resume playback,
– To stop playback
Erase message
{ERASE}
currently playing
*1 If pressed within the first 5 seconds of
a message, the previous message is
played.
Erasing all messages
Press {ERASE} 2 times while the unit is
not being used.
L All messages including voice memos
are erased.
Erasing all messages for the desired
line(s)
1
Press {IP/TEL} repeatedly until the
display shows the desired line(s)
(n and/or m).
2
Press {ERASE} 2 times.
60
For product assistance, visit www.globarange.com
*1
press {6} (centre of
navigator key).
completely, press
{STOP} again.
For A assistance, visit www.joip.com
Listening to messages
using the handset
When new messages have been
recorded:
– "New message" is displayed.
– The message indicator on the handset
flashes slowly if the message alert
feature is turned on (page 65).
1
{MENU} i {PLAY}
L The handset plays new messages
including voice memos.
L When you have no new
messages, the handset plays
back all messages.
2
When finished, press {OFF}.
Note:
L You can also listen to the messages
as follows:
To play new messages:
{MENU} i {#}{3}{2}{3}
To play all messages:
{MENU} i {#}{3}{2}{4}
L To switch to the receiver, press {s}.
Calling back (Call Display
subscribers only)
If caller information was received for the
call, you can call the caller back while
listening to the message.
1
Press {SELECT} during playback.
L k To edit the number before
calling back, press {EDIT}
repeatedly until the phone
number is shown in the desired
format (page 45).
L l To edit the number before
calling back, press {EDIT}. Then
add or erase digits to the
beginning of the number by
pressing the desired dial key or
{CLEAR}.