Table of Contents
Advertisement
Preparation
Understanding the indicators on the base unit
TEL indicator/IP indicator
The TEL indicator and IP indicator show the status of the landline and IP line,
respectively, as follows.
Status
Light off
Light on
Flashing rapidly
Flashing
*1 k When another phone uses the same landline, the TEL indicator lights.
STATUS indicator
During the startup process you may notice that the STATUS indicator on the base
unit is flashing. This indicates that the base unit is booting up with the A service.
You may find the following flash patterns helpful to you:
Status
Colour
Light pattern
Green
On
Flashing
Red
On
Flashing
Flashing
rapidly
22
For product assistance, visit www.globarange.com
Meaning
The line is available.
The line is in use.
A call is being received.
A call is put on hold.
The answering system is answering a call. (BB-
GT1540)
The IP indicator flashes when the base unit software is
being downloaded from the A service.
Meaning
L The base unit is connected to the Internet. The
startup process is complete and you may now
make and receive A internet calls.
L The base unit is downloading data from the A
service. Do not disconnect the Ethernet cable or
AC adaptor from the base unit until the STATUS
indicator stops flashing and lights in steady green.
L When the base unit is turned on, the STATUS
indicator lights in red for about 3 seconds.
L The base unit is registering a handset.
L The base unit is paging handsets. (BB-
GT1500/BB-GT1502)
For A assistance, visit www.joip.com
*1
Advertisement
Table of Contents
