Parts Identification - Power Fist 3042597 User Manual

8507626
UNPACKING
1. Carefully remove the tool from the package and retain the packing material until you have
carefully inspected and satisfactorily install or operated the tool.
2. Make sure that all the items in the parts list are included.
3. Inspect the parts carefully to make sure the tool was not damaged while shipping.
WARNING! If any part is missing, do not operate the tool until the missing parts are replaced.
Failure to do so could result in serious personal injury.

PARTS IDENTIFICATION

A Blade Holder
B
Blade Release Lever
C Motor Vents
D
Rotating Handle Release Button
E LED Switch
F
Motor Vents
G Speed Control Wheel
ASSEMBLY
NOTE: The drawings in the assembly operation sections of this manual may differ slightly from the tool.
WARNING! Always disconnect the tool from the power source before installing or removing blades
or adjusting the saw in any way.
Visit www.princessauto.com for more information
9A Reciprocating Saw
H Hex Key
I Trigger Switch
J Pivoting Shoe Adjusting Screws
K Dual LED work light
L Pivoting Shoe
M Wood Cutting Blade
V 3.04
7