Record And Playback Speech Messages - Securacom SEC8 User Manual

13. Access your alarm system as described in the "Remote Access" section.
14. After the main menu has finished playing, enter
touch-tone phone. The system will prompt you with the current output status:
15. To switch the output to the opposite state, enter
touch-tone phone. The system will prompt you with the new output status:
16. Repeat steps 2 and 3 for other outputs or enter
17. To end the remote access session, enter
No Remote Control Function
1
2
3
4
5

Record and Playback Speech Messages

The four speech dialler messages can be recorded and played back, providing the system is
remotely accessed with either user 00 (engineer) or user 01 (master).
To playback a speech dialler message from a remote location, please proceed as follows:
18. Access your alarm system as described in the "Remote Access" section.
19. After the main menu has finished playing, enter
touch-tone phone. The selected message is played back over the telephone.
20. Repeat step 2 for other messages or enter
21. To end the remote access session, enter
To record a speech dialler message from a remote location, please proceed as follows:
22. Access your alarm system as described in the "Remote Access" section.
23. After the main menu has finished playing, enter
touch-tone phone. Speak loud and clear the message you want to record, when
finished press the
24. Repeat step 2 for other messages or enter
25. To end the remote access session, enter
P0031-LU-01.00
"Output ? Off."
"Output ? On."
key.
#
*9?#
*9?#
to play the main menu.
*#
on your touch-tone phone.
*99#
*7?#
to play the main menu.
*#
on your touch-tone phone.
*99#
*8?#
to play the main menu.
*#
on your touch-tone phone.
*99#
(where ? is 1 to 5) on your
(where ? is 1 to 5) on your
(where ? is 1 to 4) on your
(where ? is 1 to 4) on your
35