Table of Contents
Advertisement
Bypassing Zones - B
When a zone is bypassed it is prevented from causing an alarm. This feature can be used to
temporarily remove the protection of one or more detection zones when arming the system.
To bypass one or more zones, please proceed as follows:
User Menu:--
01: Stay Arm 1
Bypass Zone: --
Zones Bypassed are:
Bypass Zone: --
Zones Bypassed are:
Bypass Zone: --
03: Lounge
When finished press
User Menu:--
01: Stay Arm 1
If the Quick Bypass feature is enabled at the selected remote keypad, you may
omit step 1 when bypassing zones from the above procedure.
If the "Reinstate Bypassed Zones on Disarm" option is enabled by your installer,
the selected zones are automatically reinstated when the system is disarmed.
To reinstate a bypassed zone simply select the zone at step 3 in the above
procedure.
12
Enter your access code
Press the
Enter zone number followed by
e.g. enter 3* for zone 3.
The display scrolls the bypassed zones.
Repeat step 3 to add or remove zones.
R
The selected zone(s) are now bypassed:
A
Press
to away arm.
S
Press
to stay arm.
99*
Enter
to exit the user menu.
????
.
B
key.
*
.
to exit bypass menu.
Ur
By
BY
03
Bypass on
Ur
P0031-LU-01.00
Advertisement
Table of Contents
