Change Code 81; Program Mode 91; Exit Menu 99 - Securacom SEC8 User Manual

Change Code
This option allows you to change your own access code. Your access code can be 4, 5 or 6
digits in length.
To change your own access coder, please proceed as follows:
User Menu:--
81: Change Code
Enter New Code:
ÿ
Enter new code 4, 5 or 6 digits, then press
User Menu:--
01: Stay Arm 1
If the remote keypad generates an error tone after pressing the
then the access code cannot be used. Simply repeat the procedure from step 2 but
use an alternative access code at step 3.
Program Mode
This option selects the user programming mode. This option is only available to the master
user. Please refer to the next section for full details on user programming options.
Exit Menu
This option exits the user or programming menus and returns the system to the normal
disarmed state.
22
81*
Enter your access code
81*
to Change Code.
Enter
99*
Enter to exit the user menu.
91*
99*
????
.
*
.
Ur
81
Ur
key at step 3,
*
P0031-LU-01.00