Table of Contents
Advertisement
Away Arm
To away arm your alarm system from a remote location, please proceed as follows:
1.
Access your alarm system as described in the "Remote Access" section.
2.
After the main menu has finished playing, enter
system will prompt:
3.
The main menu is prompted:
"System armed, press 0 to disarm, press * to hear again."
4.
To end the remote access session, enter
Stay Arm
To stay arm your alarm system from a remote location, please proceed as follows:
5.
Access your alarm system as described in the "Remote Access" section.
6.
After the main menu has finished playing, enter
system will prompt:
7.
The main menu is prompted:
"System stay armed, press 0 to disarm, press * to hear again."
8.
To end the remote access session, enter
Disarm
To disarm your alarm system from a remote location, please proceed as follows:
9.
Access your alarm system as described in the "Remote Access" section.
10. After the main menu has finished playing, enter
system will prompt:
11. The main menu is prompted:
"Press 1 to arm, press 2 to stay arm, press * to hear again."
12. To end the remote access session, enter
Turn Remote Controlled Outputs On and Off
The SEC8 security system has 5 remote controlled outputs that can be switched on and off
when the system is remotely accessed via a touch-tone telephone. Your installer will
normally connect one or more of the remote controlled outputs to control lighting etc.
To turn on or off the remote controlled outputs from a remote location, please proceed as
follows:
34
*1#
"Exit started."
*99#
*2#
"Exit started."
*99#
*0#
"System Disarmed."
*99#
on your touch-tone phone. The
on your touch-tone phone.
on your touch-tone phone. The
on your touch-tone phone.
on your touch-tone phone. The
on your touch-tone phone.
P0031-LU-01.00
Advertisement
Table of Contents
