Table of Contents
Advertisement
Time and Date
The system has a real time clock that must be programmed so that the time and date is
recorded correctly in the system event log. The time and date is also displayed on the
bottom line of the LCD keypad. If the system looses all power, the time and date is
maintained for approximately 2 days.
To program the Time and Date, please proceed as follows:
Ensure that User Program Mode is selected.
User Menu:--
Option:----
Set Hours
Set Hours
Press
Press
Press
When programming the time and date it is easier to start at option 9001 (hours),
then use the
32
Enter option number:
9001
: Hours
9002
: Minutes
9003
: Seconds
9004
: Day
9005
: Month
9006
: Year
*
Then press
to edit.
e.g. Enter 9001* for Hours.
23
Enter new value,
e.g, Enter 17for 5pm .
17
*
to accept and return to step
R
to cancel and return to step
#
to accept and move to next option.
#
key at step 4 to move to the next option.
Ur
90 01 =2
90 01 =1
...
Ì
.
Ë
.
3
7
P0031-LU-01.00
Advertisement
Table of Contents
