Walk Test - 11 - Securacom SEC8 User Manual

Walk Test - 11*

This option allows the detection zones to be tested without causing an alarm. As each
detector is activated, the keypad generates an acknowledgment tone and the zone number
is recorded on a list of tested zones. The tested zones are then scrolled on the remote
keypad display.
To walk test one or more zones, please proceed as follows:
User Menu:--
11: Do Walk Test
Zones Tested:00
Zones Tested:03
Lounge Detector
Zones Tested:04
Hallway Detector
User Menu:--
01: Stay Arm 1
P0031-LU-01.00
Enter your access code
11*
to select Walk Test
Enter
Activate the zones that require testing
e.g. Activate the detectors for zones 3 & 4.
The display scrolls the tested zones.
Repeat step 3 to test further zones.
When finished press
99*
Enter to exit the user menu.
????
.
R
to exit the menu.
Ur
Ct
Ct
03
04
Ur
13