Expansion Memory Module - HP Elitebook 2540p Maintenance And Service Manual

Expansion memory module

Description
4096-MB memory module (1333-MHz, DDR3)
2048-MB memory module (1333-MHz, DDR3)
1024-MB memory module (1333-MHz, DDR3)
Before removing the memory module, follow these steps:
1.
2.
3.
4.
Remove the memory module:
1.
2.
3.
4.
52 Chapter 4 Removal and replacement procedures
Downloaded from www.Manualslib.com
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
Remove the battery (see Battery on page
Position the computer with the front toward you.
Loosen the three captive screws (1) that secure the memory module compartment cover to the
computer.
Lift the rear edge of the cover (2), swing it up and forward back, and then remove the cover. The
memory module compartment cover is included in the Plastics Kit, spare part number
598796-001.
Spread the retaining tabs (1) on each side of the memory module slot to release the memory
module. (The edge of the module opposite the slot rises away from the computer.)
manuals search engine
48).
Spare part number
599092-002
598856-002
598859-002
ENWW