Restoring Factory Settings In Computer Setup - HP Elitebook 2540p Maintenance And Service Manual

2.
3.
To exit Computer Setup menus, choose one of the following methods:
●
●
Your changes go into effect when the computer restarts.

Restoring factory settings in Computer Setup

NOTE:
To return all settings in Computer Setup to the values that were set at the factory, follow these steps:
1.
2.
3.
4.
5.
Your changes go into effect when the computer restarts.
NOTE:
settings.
102 Chapter 5 Computer Setup
Downloaded from www.Manualslib.com
NOTE: You can use either a pointing device (TouchPad, pointing stick, or USB mouse) or the
keyboard to navigate and make selections in Computer Setup.
Press f10 to enter BIOS Setup.
Select the File, Security, or System Configuration menu.
To exit Computer Setup menus without saving your changes, click the Exit icon in the lower-left
corner of the screen, and then follow the on-screen instructions.
– or –
Use the tab key and the arrow keys to select File > Ignore changes and exit, and then press
enter.
– or –
To save your changes and exit Computer Setup menus, click the Save icon in the lower-left
corner of the screen, and then follow the on-screen instructions.
– or –
Use the tab key and the arrow keys to select File > Save changes and exit, and then press
enter.
Restoring defaults will not change the hard drive mode.
Turn on or restart the computer, and then press
Menu" message is displayed at the bottom of the screen.
Press f10 to enter BIOS Setup.
Use a pointing device or the arrow keys to select File > Restore defaults.
Follow the on-screen instructions.
To save your changes and exit, click the Save icon in the lower-right corner of the screen, and
then follow the on-screen instructions.
– or –
Use the arrow keys to select File > Save changes and exit, and then press enter.
Your password settings and security settings are not changed when you restore the factory
manuals search engine
esc while the "Press the ESC key for Startup
ENWW