Top Cover - HP Elitebook 2540p Maintenance And Service Manual

Top cover

NOTE:
board and cable, and TouchPad bracket.
Description
For use only on computer models equipped with a fingerprint reader (includes fingerprint reader and
cable)
For use only on computer models not equipped with a fingerprint reader
Before removing the top cover, follow these steps:
1.
2.
3.
4.
Remove the top cover:
1.
2.
3.
ENWW
Downloaded from www.Manualslib.com
The top cover spare part kit includes the TouchPad board and cable, TouchPad button
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
Remove the battery (see Battery on page
a. Memory module compartment cover (see
b. Wireless module compartment cover (see
c. Switch cover and keyboard (see
d. Display assembly (see
Turn the computer upside down, with the front toward you.
Remove the four rubber screw covers (1) on the front edge of the base enclosure.
Remove the two rubber screw covers (2) in the rear corners of the base enclosure.
manuals search engine
48), and then remove the following components:
Expansion memory module on page
WLAN module on page
Switch cover and keyboard on page
Display assembly on page
Spare part number
598801-001
598802-001
57)
69)
76)
Component replacement procedures
52)
85