System Configuration Menu - HP Elitebook 2540p Maintenance And Service Manual

Hide thumbs Also See for Elitebook 2540p:
Table of Contents

Advertisement

System Configuration menu

NOTE:
Select
Language
Boot Options
Device Configurations
ENWW
Downloaded from
www.Manualslib.com
Some of the menu items listed in this section may not be supported by your computer.
manuals search engine
To do this
Change the Computer Setup language.
Set a Startup Menu delay (in seconds).
Set the MultiBook Express Boot Popup delay in
seconds.
Enable/disable Custom Logo (disabled by default).
Enable/disable Display Diagnostic URL (enabled by
default).
Enable/disable CD-ROM boot (disabled by default).
Enable/disable SD Card boot (enabled by default).
Enable/disable floppy boot (enabled by default).
Enable/disable PXE Internal NIC boot (enabled by
default).
Enable/disable Unified Extensible Firmware Interface
(UEFI) Boot Mode (disabled by default).
Set the Legacy Boot Order.
Enable/disable USB legacy support (enabled by
default). When enabled, USB legacy support allows the
following:
Use of a USB keyboard in Computer Setup even
when a Windows operating system is not running
Startup from bootable USB devices, including a
hard drive, diskette drive, or optical drive
connected by a USB port to the computer
Select a parallel port mode: ECP (Enhanced
Capabilities Port), standard, bidirectional, or EPP
(Enhanced Parallel Port).
Enable/disable fan always on while connected to an AC
outlet (enabled by default).
Enable/disable Data Execution Prevention (select
models only). When enabled, the processor can disable
some virus code execution, which helps to improve
computer security (disabled by default).
SATA (Serial Advanced Technology Attachment) device
mode. The following options are available:
AHCI (Advanced Host Controller Interface)
IDE (Integrated Drive Electronics)
RAID (select models only)
Windows XP 121

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents