Display Console - LifeFitness 9500 Series Service Manual

Life Fitness Model 9500 Series HR and Telemetry Equipped Treadmills
How To...REMOVE AND REPLACE THE DISPLAY CONSOLE
Tools Required: Phillips screwdriver, socket and ratchet set
Step 1
Turn the power OFF at the ON/OFF switch and by unplugging the machine at the electrical outlet.
Step 2
Remove the four SCREWS securing the CONNECTOR COVER to the bottom of the DISPLAY CONSOLE.
Step 3
Unplug the 10 PIN CONNECTOR and the 4 PIN CONNECTOR from the back of the DISPLAY CONSOLE.
Step 4
Remove the four SCREWS securing the DISPLAY CONSOLE to the HANDRAIL BRACKETS.
Step 5
Rest the new DISPLAY CONSOLE on the BRACKETS, then install and tighten the four SCREWS in a criss-cross
pattern to secure it in place. Do not overtighten the screws.
NOTE: BE CAREFUL NOT TO PINCH ANY WIRES BETWEEN THE
DISPLAY CONSOLE AND THE BRACKETS.
Step 6
Reverse Steps 1 through 3 to complete installation.
4