Set-up overview
There are two ways in which the controller can be set up. Select the one that is easiest for you: either "Wizard" or a review of "all
parameters".
Start screen upon delivery
Press "Enter"
The default password upon
delivery is 300. Use the arrow
keys to set the password. End
by pressing "Enter"
Select a set-up method. End
by pressing "Enter"
AK-PC 351
Hold "Enter" down for 2 sec-
onds to come to password entry
Main Menu
The first setting is the
Plant type
When the Plant type has
been selected, it will al-
low several settings to be
made.
For example:
Continue to the next
menus.
All settings are explained
on the pages that follow
User Guide RS8GZ302 © Danfoss 2015-06
Operating principles
1. Select position using arrow keys
2. Select using "Enter"
3. Use the "X" to return
Wizard
Here you will be led through a series of settings, after
which the controller will be ready for start.
Image 1 of 22 is displayed here.
The following options are available here:
• Comp. + Cond. = suction group and condenser
• Condenser = ondenser only
• Compressor = suction group only
• None
7