Shooting Photo/Video - Protocol VIDEODRONE FX Instruction Manual

SHOOTING PHOTO/VIDEO

1. The memory card comes pre-inserted into the camera.
SHOOTING PHOTOS AND VIDEO
1. Turn on the drone and sync.
2. Photo: Push the Photo button and the camera will take a photo. The lights
on the drone will flash once as it's taking the picture.
3. Video: Push the Video and the camera will begin to record. The lights on
the camera will flash continuously while recording. Push the Video button
again and the camera will stop recording.
4. Connect the USB transfer cable to the drone and plug it into the USB port
of your computer. If you are using Windows, the USB will come up on the
removable drive. If you are using OS, then the USB will come up as
"Untitled".
5. Open the drive and then open the Video or Photo folders to access the .AVI
or JPEG files.
6. .AVI movies can be played in several different formats including Quicktime,
Windows Media Player, and RealPlayer
WARNING: Never remove the card from the video camera while the drone is
turned on.
16
REPLACEMENT PARTS
Thank you for your purchase of Protocol's VideoDrone FX with Camera.
We know that accidents can sometimes happen and that is why we offer
spare parts kits on our website: ProtocolNY.com.
LIMITED WARRANTY
At Protocol, we're dedicated to bringing you innovative and well-designed
products that make living fun and easy. We stand behind all of our products
and warrant this to be free from defects in workmanship and materials for 30
days from the date of purchase. The warranty does not cover transportation
damage, misuse, accident, or similar events. Specific legal rights pertaining
to this warranty may vary by state.
For service claims or questions please consult our website ProtocolNY.com.
17