The Image Is Cut Up (Large)/Small - Epson EMP-7600 Owner's Manual

The image is cut up (Large)/Small

· The image is cut up
· The image is small
76 - When the Indicators provide No Help
G
There is a possibility that the [Resize] setting has not been correctly
selected.
Press the [Resize] button.
see page 51
G
Has the [Position] been adjusted?
Adjust with [Menu] − [Video] − [Position].
see page 62
G
Is the selected resolution correct?
Align the computer with the signals supported by the projector. Refer
to the computer's instruction manual for details on how to amend the
signals.
see page 21
G
Amend the resolution for note-type and liquid crystal type
computers.
Either amend the resolution so that the display fills the entire screen,
or set the image signals so that only external output is possible.
see page 21
G
Has the system been set for dual display?
Only half of the computer screen's image will be displayed with the
projector if dual display has been set with [Display Properties] on the
control panel. Cancel the dual display setting to display the entire
computer screen image. Refer to the video driver manual supplied
with the computer in use for further details.