In The Case Of Dvi-D - Epson EMP-7600 Owner's Manual

In the case of DVI-D*

Digital signals are output to the projector without amendment if a digital video card for liquid
crystal displays and output port are mounted onto the computer.
· Connect the Computer's digital output port to the projector's Computer #1 DVI-D port with
the optional digital video cable (ELPKC20/21).
· Set the switch to the digital setting (right-hand side) with the tip of a ballpoint pen or other
pointed object.
Point:
· There are cases where the computer must be set up in order to switch the computer out-
put to the DVI-D. Refer to the instruction manual for the computer for further details.
· If a mini D-sub 15-pin computer is to be connected at the same time, connect it to the
Computer #2 port.
Monitor port
Digital Video Cable
(optional)
Connecting the projector to a computer - 27
Computer #1 DVI-D Port