Connecting External Audio Equipment - Epson EMP-7600 Owner's Manual

Connecting external audio equipment

It is possible to enjoy dynamic sound by connecting the Audio Out port on the projector to a
PA system, an active speaker system, or other speakers equipped with built-in amplifiers.
External audio equipment
Use audio connection cables available on the open market (pin plug
jack plug).
Point
· The sound is output externally when the stereo mini-jack is inserted into the Audio Out
port. Sound will not be output from the projector's speakers when this connection is
made.
· The sound on the images being projected will be output.
· Purchase an audio connection cable that matches up with the connector on the external
audio equipment to be used.
Audio connection cable (available on the open market)
Connecting the projector to a computer - 29
Audio Out port
↔
3.5mm stereo mini-