Range Of Remote Control Operations - Epson EMP-7600 Owner's Manual

Range of Remote Control Operations

Depending on the distance and angle from the main unit's light receiving area, there are cases
where the remote control will not function. Ensure that the remote control is used within the fol-
lowing conditions:
G Operable distance: Approximately 10 meters
G Operable range:
Approximately 30
degrees to the
left and right
Point
· Ensure that the [R/C ON OFF] switch is set at [ON] when using the remote control unit.
· Aim the remote control at the projector's light-receiving area.
· There are cases where the operable distance (approximately 10 meters) of the remote
control is diminished when signals are reflected off screens depending on the type of
screen in use.
· Ensure sunlight or florescent light does not affect the projector's light receiving area.
· If the remote control will not function or malfunctions, there is a possibility that the batter-
ies need changing. In this event, replace the batteries accordingly.
· Use the optional remote control receiver (ELPST02) if it is to be used at a distance of 10m
or more.
16 - Parts, Names and Operations
(Front Panel)
Light-emitting area on
the remote control
Approximately 15
degrees up and down
Approximately 15
degrees
(Rear Panel)
Approximately 15
degrees up and down
Approximately 15
degrees
Approximately 30
degrees to the
left and right