1. Manuals
  2. Brands
  3. Miele Manuals
  4. Hob
  5. CS 1421
  6. Operating and installation instructions

Miele CS 1421 Operating And Installation Instructions

Salamander
Hide thumbs Also See for CS 1421:
Table of Contents

Advertisement

Quick Links

Download this manual
Operating and installation instructions
Salamander
To avoid the risk of accidents or damage to the appliance it is essential
to read these instructions before it is installed and used for the first time.
en-GB
M.-Nr. 07 180 450

Advertisement

Table of Contents
loading

Related Manuals for Miele CS 1421

Summary of Contents for Miele CS 1421

  • Page 1 Operating and installation instructions Salamander To avoid the risk of accidents or damage to the appliance it is essential to read these instructions before it is installed and used for the first time. en-GB M.-Nr. 07 180 450...

  • Page 2: Table Of Contents

    Contents Warning and Safety instructions................ 4 Caring for the environment ................ 13 Guide to the appliance .................. 14 Salamander ......................14 Indicators....................... 14 Using for the first time .................. 15 Cleaning the CombiSet for the first time ............... 15 Switching on the CombiSet for the first time ............15 Operation......................
  • Page 3 Contents Installation...................... 31 Building-in several CombiSets ................ 35 Electrical connection .................. 37 After sales service, data plate, guarantee ............ 39...

  • Page 4: Warning And Safety Instructions

    They contain important notes on in- stallation, safety, use and maintenance. Miele cannot be held liable for damage caused by non-compliance with these instructions. Keep these instructions in a safe place and ensure that new users...
  • Page 5 Warning and Safety instructions Correct application  This salamander is designed for domestic use and for use in sim- ilar environments.  This salamander is not intended for outdoor use.  This salamander is intended for domestic use only to cook food and keep it warm.
  • Page 6 Warning and Safety instructions Safety with children  Children under 8 years of age must be kept away from the sala- mander unless they are constantly supervised.  Children 8 years and older may only use the salamander unsuper- vised if they have been shown how to use it safely and recognise and understand the consequences of incorrect operation.
  • Page 7  Unauthorised installation, maintenance and repairs can cause considerable danger for the user. Installation, maintenance and re- pairs must only be carried out by a Miele authorised technician.  A damaged salamander can be dangerous. Check it for visible signs of damage. Do not use a damaged appliance.
  • Page 8 Miele authorised service technician. Otherwise the guarantee is invalidated.  Miele can only guarantee the safety of the appliance when genu- ine original Miele replacement parts are used. Faulty components must only be replaced by Miele spare parts.
  • Page 9 Warning and Safety instructions  If the salamander is installed behind a furniture panel (e.g. a door), ensure that the door is never closed whilst the salamander is in use. Heat and moisture can build up behind a closed furniture panel and cause subsequent damage to the salamander, the housing unit and the floor.
  • Page 10 Warning and Safety instructions Correct use  The salamander gets hot when in use and remains hot for some time after being switched off. The risk of burning is present until the residual heat indicators have gone out.  Do not use the salamander to heat up the room. Due to the high temperatures radiated, objects left near the salaman- der could catch fire.
  • Page 11 Warning and Safety instructions  Salt, sugar and grains of sand, e.g. from cleaning vegetables, can scratch the surface. Keep surfaces clean at all times.  Rough bases will scratch the ceramic surface. Only use dishes with smooth bases. Lift dishes to move them to prevent the risk of scratches and marks on the surface.
  • Page 12 Warning and Safety instructions Cleaning and care  Do not use a steam cleaning appliance to clean this salamander. The steam could reach electrical components and cause a short cir- cuit.

  • Page 13: Caring For The Environment

    / recycling centre for electrical and electronic ap- pliances, or contact your dealer or Miele for advice. You are also respons- ible by law for deleting any personal data that may be stored on the appli- ance being disposed of. Please ensure...

  • Page 14: Guide To The Appliance

    Guide to the appliance Salamander a Browning unit, motor driven Control knobs: b Standing surface, removable d For setting the power level c Indicators e For setting the height of the browning unit Indicators f In-operation indicator g Residual heat indicator...

  • Page 15: Using For The First Time

    Using for the first time  Please stick the extra data plate for Switching on the CombiSet for the appliance supplied with this doc- the first time umentation in the space provided in The metal components have a protect- the "After sales service, data plate, ive coating which when heated for the guarantee"...

  • Page 16: Operation

    Operation Raising and lowering the Switching on browning unit  Fire hazard. Do not leave the salamander unat- Raising the unit tended whilst it is being used.  To raise the browning unit, turn the left-hand control to .  Turn the right hand control clockwise or anti-clockwise to the required The browning unit will extend up to its power level.

  • Page 17: To Brown Or Crisp Food

    Operation To brown or crisp food Keeping warm  Raise the browning unit. The salamander is not suitable for re- heating cold food.  Place the dish containing food to be Hot food can be kept warm for a few browned on the standing surface.

  • Page 18: After Use

    Operation After use  Switch the salamander off.  Clean the salamander after each use while it is still warm to the touch (see "Cleaning and care").  Do not lower the browning unit until the residual heat indicator has gone out.

  • Page 19: Safety Features

    Safety features Thermal retraction stop sensor Obstruction sensor Your salamander is fitted with a thermal If the browning unit meets an obstruc- retraction stop sensor to prevent dam- tion (e.g. a dish) whilst it is being age to the appliance when lowering the lowered, it stops immediately and rises browning unit.

  • Page 20: Cleaning And Care

    Cleaning and care  Allow the CombiSet to cool down Danger of burning. before cleaning. Before cleaning the salamander make sure that you have switched it  The CombiSet and accessories off and that it has cooled down. should be cleaned after each use. ...

  • Page 21: Stainless Steel

    Cleaning and care Stainless steel Standing surface  Clean the control panel and all stain-  Clean standing surfaces with a solu- less steel surfaces with a solution of tion of warm water and a little wash- warm water and a little washing-up li- ing-up liquid applied with a soft quid applied with a soft sponge.

  • Page 22: Ceramic Surface Of The Browning Unit

    Cleaning and care Ceramic surface of the brown- ing unit  Remove coarse soiling with a damp cloth.  Then clean the surface with a suitable ceramic and stainless steel hob cleaner (see "Optional accessories") applied with paper towel or a clean cloth.

  • Page 23: Problem Solving Guide

    Danger of injury. Installation, maintenance and repairs may only be carried out by a suitably qualified and competent person. Repairs and other work by unqualified persons could be dangerous. Miele can- not be held liable for unauthorised work. Do not attempt to open the casing of the CombiSet yourself.
  • Page 24 Problem solving guide Problem Cause and remedy The browning unit can- The browning unit has not cooled down sufficiently. not be lowered.  The residual heat indicator must have gone out. The standing surface has not been positioned cor- rectly. ...

  • Page 25: Optional Accessories

    These products can be ordered through the Miele Webshop. Removes heavy soiling, limescale de- posits and aluminium residues These can also be ordered from Miele (see end of this booklet for contact de- Stainless steel conditioning tails) or from your Miele dealer.

  • Page 26: Safety Instructions For Installation

    Safety instructions for installation Fit the wall units and cooker hood before fitting the CombiSet to avoid dam- aging it.  The veneer or laminate coatings of worktops (or adjacent kitchen units) must be treated with 100 °C heat-resistant adhesive which will not dissolve or distort.

  • Page 27: Safety Distances

    Safety distances Safety distance above the CombiSet A minimum safety distance must be maintained between the CombiSet and the cooker hood above it. See the cooker hood manufacturer's operating and installation instructions for details. If the manufacturer's instructions are not available for the cooker hood a min- imum safety distance of at least 760 mm must be maintained, or if any flammable objects (e.g.
  • Page 28 CS 1122 CS 1134 CS 1326 CS 1327 CS 1411 100 mm CS 1012 / CS 1012-1 150 mm CS 1421 CS 1312 Not recommended CS 1322 200 mm CS 1034 / CS 1034-1 250 mm CS 1011 / CS 1021...

  • Page 29: Installation Notes

    Installation notes Seal between the CombiSet Tiled worktop and the worktop Grout lines  and the hatched area un- derneath the CombiSet frame must be smooth and even. If they are not the Do not use sealant between the CombiSet will not sit flush with the CombiSet and the worktop.

  • Page 30: Building-In Dimensions

    Building-in dimensions a Spring clamps b Front c Casing depth d Casing depth including mains connection box with mains connection cable, L = 2000 mm e Browning unit, height-adjustable...

  • Page 31: Installation

    Installation Preparing the worktop  Make the worktop cut-out as shown in "Building-in dimensions" or as cal- culated (see Building-in several CombiSets). Observe the safety dis- tances (see "Safety distances"). Wooden worktops  Seal the cut surfaces with a suitable sealant to avoid swelling caused by moisture.
  • Page 32 Installation Natural stone worktops You will need heavy duty double-side tape (not supplied) to secure the spring clamps and spacer bars.  Apply silicone to the side and lower edges of the spring clamps  and the spacer bars .  Then fill gap  between spacer bar ...
  • Page 33 Installation Building in several CombiSets Installing the CombiSet  Push the built-in CombiSet to the  Feed the mains connection cable side until the holes in the spacer bar down through the cut-out. can be seen.  Starting at the front, position the CombiSet in the worktop cut-out.
  • Page 34 Installation Connecting the CombiSet  Connect the CombiSet(s) to the mains.  Check that each CombiSet works. Removing the CombiSet If the CombiSet cannot be accessed from below, you will need a special tool to remove it.  If the CombiSet can be accessed from below, push it out from below.

  • Page 35: Building-In Several Combisets

    Building-in several CombiSets Example: 3 CombiSets a Spring clamps b Spacer bars c Gaps between spacer bars and worktop d Cover strips e CombiSet width minus 8 mm f CombiSet width g CombiSet width minus 8 mm h Worktop cut-out...
  • Page 36 Building-in several CombiSets Calculating the worktop cut-out The frames of the CombiSets overlap the worktop at the outside right and left by 8 mm on each side.  Add up the widths of the CombiSets and subtract 16 mm from this figure. Example: 288 mm + 288 mm + 380 mm = 956 mm - 16 mm = 940 mm The CombiSets are 288 mm, 380 mm or 576 mm wide depending on model (see...

  • Page 37: Electrical Connection

    Residual current device  Danger of injury. For extra safety, it is advisable to pro- Miele cannot be held liable for unau- tect the CombiSet with a suitable resid- thorised installation, maintenance ual current device (RCD) with a trip and repair work as this can be dan- range of 30 mA.
  • Page 38 If the mains cable needs to be replaced it must be replaced with a special con- Safety fuses nection cable, type H 05 VV-F (PVC-in- sulated), available from Miele.  Completely remove fuses The connection data is quoted on the Automatic circuit breakers data plate.

  • Page 39: After Sales Service, Data Plate, Guarantee

    N.B. A call-out charge will be applied to service visits where the problem could have been resolved as described in these instructions. When contacting your Dealer or Miele, please quote the model and serial number of your appliance. Data plate Space in which to stick the extra data plate supplied with the appliance.
  • Page 43 Tel: +971 4 3044 999 Tel: (01) 461 07 10, Fax: (01) 461 07 97 Fax: +971 4 3418 852 E-Mail: info@miele.ie, Internet: www.miele.ie 800-MIELE (64353) Manufacturer: Miele & Cie. KG E-Mail: info@miele.ae Carl-Miele-Straße 29, 33332 Gütersloh, Germany Internet: www.miele.ae...
  • Page 44 CS 1421  en-GB M.-Nr. 07 180 450 / 09...

Table of Contents