Unpacking - Wen APEX Pro 3710 Operator's Manual

Unpacking

WARNING - to prevent accidental starting that could cause possible serious personal injury;
assemble all parts to your saw before connecting it to power supply. Saw should never be
connected to power supply when you are assembling parts, making adjustments, installing or
removing blades, or when not in use.
WARNING - if any parts are missing, do not operate this tool until the missing parts are
replaced. Failure to do so could result in possible serious personal injury.
Do not discard the packing materials until you have carefully inspected the saw, identified all parts,
and satisfactorily operated your new saw.
NOTE: if any parts are damaged or missing, do not attempt to plug in the power cord and turn the
switch on until the damaged or missing parts are obtained and are installed correctly.
Item Description
1 Table Saw
2 Miter gauge
3 Rip Fence
4 Wheel Handle
5 Blade Guard
6 Blade Wrench
7 Anti-kickback Device
8 Table Insert
Qty Item Description
1
1 10
1 11
1 12
1 13
2 14
1 15
2
11
9 Push Stick
Long Top Plate
Short Top Plate
Long Support Plate
Short Support Plate
Leg
Rubber Foot
Hardware Bag (not shown)
Qty
1
2
2
2
2
4
4
1