Table of Contents
Advertisement
WARNING! Do not plug in or turn on the tool until it is fully assembled according to the instructions. Failure
to follow the safety instructions may result in serious personal injury.
UNPACKING
With the help of a friend or trustworthy foe, carefully remove the band saw from the packaging. Make sure to take
out all contents and accessories. Do not discard the packaging until everything is removed. Check the packing list
below to make sure you have all of the parts and accessories. If any part is missing or broken, please contact our
customer service at 1-800-232-1195 (M-F 8-5 CST), or email techsupport@wenproducts.com.
Bandsaw (1)
Stand Top (1)
Fence Hardware
1. M6x20 Fence Stand-Off (1)
2. M8x20 Lock Handle (1)
3. M6x16 Cap Screws (2)
4. M6x20 Hex Bolts (2)
5. 6mm Lock Washers (2)
6. 6mm Flat Washers (2)
7. M8 Hex Nut (1)
8. M6 Hex Nut (1)
10
UNPACKING & PACKING LIST
Hardware Bags (2)
Miter Gauge (1)
Stand Legs (2)
Stand Hardware
1. M6x16 Hex Bolts (8)
2. 6mm Flat Washers (8)
3. M6 Flange Nuts (8)
4. M8x16 Carriage Bolts (8)
5. M8 Flange Nuts (8)
Stand Feet Hardware
1. Stand Feet (4)
2. Hex Nuts (8)
3. Flat Washers (8)
Bandsaw Table (1)
Stand Braces (2)
Table Trunnion
Support Bracket (1)
Bandsaw Hardware
1. M8x35 Hex Bolts (4)
2. 8mm Flat Washers (8)
3. 8mm Lock Washers (4)
4. M8 Hex Nuts (4)
Trunnion Hardware
1. M8x30 Hex Bolts (2)
2. 8mm Lock Washers (2)
Positive Stop Hardware
1. M8x80 Hex Bolt (1)
2. M8 Hex Nut (1)
Table Lock Knobs (2)
Rear Fence Rail (1)
Front Fence Rail (1)
Fence Assembly (1)
Advertisement
Table of Contents
