Personal Safety - Wen APEX Pro 3710 Operator's Manual

NEVER STAND ON TOOL OR ITS STAND
Serious injury could occur if the tool is tipped or if the cutting tool is accidentally contacted. Do not
store materials on or near the tool such that it is necessary to stand on the tool or its stand to reach
them.
CHECK DAMAGED PARTS
Before further use of the tool, a guard or other part that is damaged should be carefully checked to
ensure that it will operate properly and perform its intended function. Check for alignment of moving
parts, mounting and any other conditions that may affect its operation. A guard or other part that is
damaged should be properly replaced.

Personal Safety

KNOW YOUR POWER TOOL
Read and understand the owner's manual and labels affixed to the tool. Learn its application and
limitations as well as the specific potential hazards peculiar to this tool.
DON'T OVERREACH
Keep proper footing and balance at all times.
STAY ALERT
Watch what you are doing. Use common sense. Do not operate the tool when you are tired. Do not
operate while under medication or while using alcohol or other drug.
DRESS PROPERLY
Do not wear loose clothing or jewelry. They can get caught in moving parts. Rubber gloves and non-
skid footwear are recommended when working outdoors. Wear protective hair covering to contain long
hair.
USE SAFETY GOGGLES
Also face or dust mask if cutting operation is dusty, and ear plugs during extended periods of operation.
GUARD AGAINST ELECTRIC SHOCK
Prevent body contact with grounded surfaces. For example:
Pipes, radiators, ranges, refrigerator enclosures
DISCONNECT TOOL FROM POWER SOURCE
When not in use, before servicing, when changing blades, bits, cutters, etc.
KEEP GUARDS IN PLACE
In working order, and in proper adjustment and alignment.
REMOVE ADJUSTING KEYS AND WRENCHES
When not in use, before servicing, when changing blades, bits, cutters, etc.
All repairs, electrical or mechanical, should be attempted only by trained repairmen.
Use only WEN replacement parts; any others may create a hazard.
Use only accessories that are recommended by the manufacturer for your model. Accessories that may
be suitable for one tool may become hazardous when used on another tool.
4