HOW TO USE THE MACHINE
5.3 DIRECTIONS BEFORE STARTING THE WORK
Before starting to work it is necessary to carry out several of checks and opera-
tions to ensure that the work gives the best results and is done in maximum
safety.
5.3.1 S
EAT ADJUSTMENT
To change the position of the seat, loose
the four fixing screws (1) and slide it along
the slots of the bracket.
When a comfortable position is reached,
fully tighten the four screws (1).
5.3.2 T
YRE PRESSURE
Having the correct tyre pressure is the main condition for ensuring that the cutting
deck is horizontal and thus mows evenly.
Unscrew the valve caps and connect a
compressed air line with a gauge to the
valves.
The pressures are:
FRONT
REAR
5.3.3 F
ILLING WITH OIL AND FUEL
NOTE
With the engine stopped, check its oil level. Exactly following the methods descri-
1.5 bar
1.2 bar
The type of oil and fuel to use is given in the engine manual.
1
1
EN 21