Do you have a question about the HT-R3009 and is the answer not in the manual?
Questions and answers
Gaby
June 1, 2025
How to get the drive belt past the drive axle
1 comments:
Mr. Anderson
June 1, 2025
To install the drive belt past the drive axle on a Honda HT-R3009:
1. Remove the cutter deck as described on pages 44–45 of the manual. 2. Remove the primary belt from the pulley on the belt tensioner arm by pressing out on the arm. 3. Remove the belt from the engine pulley. 4. Remove the tensioner arm by taking out the 10 mm bolt. 5. Pull the primary belt out by hand past the drive axle. 6. Install the new belt and reassemble all parts in reverse order.
Need help?
Do you have a question about the HT-R3009 and is the answer not in the manual?
Questions and answers
How to get the drive belt past the drive axle
To install the drive belt past the drive axle on a Honda HT-R3009:
1. Remove the cutter deck as described on pages 44–45 of the manual.
2. Remove the primary belt from the pulley on the belt tensioner arm by pressing out on the arm.
3. Remove the belt from the engine pulley.
4. Remove the tensioner arm by taking out the 10 mm bolt.
5. Pull the primary belt out by hand past the drive axle.
6. Install the new belt and reassemble all parts in reverse order.
This answer is automatically generated