Table of Contents
Advertisement
EN 18
➤
For hydrostatic drive models:
4.31 B
RAKE PEDAL
This pedal works the brake on
the rear wheels.
4.32 D
RIVE ENGAGEMENT PEDAL
This pedal engages drive in
the wheels as well as modula-
ting the machine's forward and
reverse speeds.
– To engage forward drive just
press it in the «F» direction
with your toe-cap, noting
that increasing the pressure
on the pedal progressively
increases the speed of the
machine
– Reverse is engaged by
pressing the pedal with the
heel, in the «R» direction.
– The pedal automatically
goes into neutral «N» when
released.
WARNING!
!
stopped.
NOTE
when the parking brake (4.4) is engaged, the engine stops.
4.33 L
EVER TO RELEASE THE HYDROSTATIC TRANSMISSION
This lever has two positions as shown on the label:
«A» = Transmission engaged: for all usage conditions, when moving and
during cutting;
«B» = Transmission released: considerably reduces the effort required for
moving the machine by hand, with the engine turned off.
Reverse must only be engaged when the machine is
If the drive pedal is used, whether forwards or for reverse,
CONTROLS AND INSTRUMENTS
4.32
N
R
4.33
4.31
F
B
A
Advertisement
Table of Contents
