Peecker Sound PS266 User Manual page 7

User's Manual
2.2 RS232: it allows to choose the link port to the processor.
Select the RS232 (COM) port, in case it does not occur automatically.
2.3 Memory: it manages the EEPROM memory of the processor.
Click the Memory key to enter the programs saved in PS266 (60 available
presets).
Buttons on the right allow the following operations:
2.3.1 Refresh: it makes visualize the presets currently memorized on the device
2.3.2 Store: it saves the current preset in the PS266 inside memory
2.3.3 Recall:it recalls the preset from the PS266 inside memory
2.3.4 Load All: it loads all the presets included in the PC (files .ay)
2.3.5 Store All: it stores (by overwriting) the list imported by Load All
2.3.6 Save All: it saves all the presets stored in the PC (files .ay)
3. View: it allows to choose what to view in the graphic interface;
4. Help: user's guide.
• Toolbar
SOUND REINFORCEMENT
CLIP CLIP CLIP
LIMIT LIMIT LIMIT
-3 -3 -3
-6 -6 -6
-12 -12 -12
PS266
-24 -24 -24
-36 -36 -36
DIGITAL SPEAKER
PROCESSOR AB
The toolbar allows a quick access to the following functions (from left to
right):
• A new preset creation;
• Opening of an existing preset;
• Overwriting of the current preset or Save As, if recalled from Memory;
• Upload key;
• View of the credit window.
• Configuration Area
The structure of the configuration area depends on the layouts of the Figuration
menu, because it shows the path of the signal from the input to the processor
to the output. In the case named, there are only 1 input and 6 outputs (Mono
configuration).
A click in the area indicated in the red circle causes the opening of a window that
includes all the controls in the block diagram.
• Description of the Control Window
The first folder in the top left-hand corner of the window (In folder) allows to
enter the controls of the equalization and of the input delay. They are useful to
apply modifications to the sound configurations (according to the surrounding,
the installation type, etc.) without acting on the factory output presets.
Clicking on the red record it is possible to enter the setting in detail of the EQ
input (type of filter, frequency, gain, etc.).
CONTROLLED RADIATION
7
CLIP CLIP CLIP CLIP
CLIP
LIMIT LIMIT LIMIT LIMIT
LIMIT
-3 -3 -3 -3
-3
-6 -6 -6 -6
-6
-12 -12 -12 -12
-12
-24 -24 -24 -24
-24
-36 -36 -36 -36
-36
MUTE MUTE MUTE MUTE
ACOUSTIC RESEARCH
DIGITAL CROSSOVER
PS266