User’s Manual DOUBLE ARRAY series 1 . PROJECT PHILOSOPHY If we try to channel sound to the dance floor by means of horns positioned inside or in front of the speakers, we will only make matters worse, as the sound quality will deteriorate unacceptably. The main problem with sound reinforcement systems has always been to concentrate sound where it is actually needed and lower it perceptibly 2.
- audio systems formed in this way can be used in wall applications for a specifically and/or particularly oriented sound reinforcement, for overhead or ceiling applications and for delimited sound diffusions. Dwg 3. With Peecker Sound double array the sound beam gets thinner in both directions SOUND REINFORCEMENT CONTROLLED RADIATION...
Page 5
Manuale DOUBLE ARRAY SERIES Double Array Series Double Array Series User’s Manual DOUBLE ARRAY Double Array Series series DIFFUSORE TRADIZIONALE DIFFUSORE TRADIZIONALE DIFFUSORE TRADIZIONALE STANDARD LOUDSPEAKER SYSTEM AREA SONORIZZATA AREA SONORIZZATA SOUND COVERAGE AREA SONORIZZATA -15dB -15dB -20dB -17dB -13dB 0dB -20dB -20dB -17dB -13dB 0dB -20dB...
User’s Manual DOUBLE ARRAY series STUDIO ESA - FLORENCE STANDARD LOUDSPEAKER SYSTEM Testing was performed by installing an AS120 Crossfire speaker system 105 dB and a standard system in an outdoor dancing venue. In both cases under investigation the speakers were suspended from the ceiling, 3.5 metres above the ground, and testing was conducted at 1.5 metres from the 105 dB ground.
Page 7
User’s Manual DOUBLE ARRAY series A) Spectrum measurement of the sound level produced at 1.5 C) Spectrum measurement of the sound level produced at 1.5 metres from the ground by one AS120 speaker mounted in metres from the ground by four AS120 speakers mounted in operating position at a height of 3.5 metres from the reflecting operating position, 6 metres from each other, at a height of 3.5 floor, pointing downwards.
This scenario had come to a critical level when the managers decided to The final aim of this Peecker Sound project was to bring forth an audio take the following compromise solutions to lessen the problems: system with highly dynamical levels on the dance floor, medium levels 1.
Page 9
10 dB la variazione sonora AS60 - AS120 - AS180): after many years of specifically focused research, 2) Responsible staff members out of all corporate functions were selected these loudspeakers have been tested on tens of different outdoors and and assigned to project execution, while G.
Page 10
dell’elemento centrale del diffusore (vedi dopo) sarebbe ingegneri della Progettazione per contenere il più possibile i co User’s Manual DOUBLE ARRAY fabbricazione e per tracciare le linee estetiche del diffusore: proprio series nte alla metà del pannello iniziale di materiale grezzo questa partecipazione si decise che il diffusore sarebbe stato provvi laborato e costoso processo di nesting delle sagome di elementi angolari sprovvisti di componenti musicalmente attivi, di al...
Page 11
Further collaboration with the University of Parma provided measurement one of the biggest Peecker Sound successes with the sale and installation of of the polar dispersion diagrams and plotting of the speaker directivity over 2,000 systems in the following five years.
User’s Manual DOUBLE ARRAY series 6.4 CAD 2D–drawing (exported in JPG) Disegno CAD 2D (esportazione in JPG senza i tool del CAD) Disegno CAD 2D (esportazione in JPG senza i tool del CAD) Disegno CAD 3D (esportazione in JPG senza i tool del CAD) 6.5 CAD 3D-drawing (exported in JPG) Disegno CAD 3D (esportazione in JPG senza i tool del CAD)
User’s Manual DOUBLE ARRAY series 7. THE OPERATION SCHEDULE Panel shearing of PVC pipe shearing row material Front of the cabinet Inside “cross” Drilling and boring Inside ‘cross’ drilling riveting of the side element riveting Pipe insertion Bottom gluing and riveting CARPENTRY Drilling of ‘cross’...
Page 14
User’s Manual DOUBLE ARRAY series Arrangement of the electric Arrangement of signal Passive crossover components cables and speakON manufacturing Wadding insertion Speaker electric wiring Insertion of cone loudspeakers ASSEMBLY Fastening of grille frame Protective grille and brand fastening Stroboscopic light insertion Assembly of corner elements Compressed air cleaning TESTING...
Need help?
Do you have a question about the AS180 and is the answer not in the manual?
Questions and answers