Table of Contents Page User Guide ........................3 Document History ......................3 Conventions ........................3 Safety and Dangers ......................4 Information on EMC .......................4 General Safety Notes .....................4 Scope of Delivery ......................4 Features..........................5 CAN-IB100/200/PCIe and CAN-IB300/400/PCI ..............5 CAN-IB500/600/PCIe and CAN-IB800/PCI ..............6 CAN-IB120/PCIe Mini and CAN-IB520/PCIe Mini .............7 Installation ........................
Page 4
Table of Contents A Regulatory Compliance....................21 EMC Compliance (CE) ....................21 FCC Compliance Statement ..................21 PC CAN Interface User Manual 4.01.0230.20000 3.0...
User Guide 3 (22) User Guide Please read the manual carefully. Make sure you fully understand the manual before using the product. Document History Version Date Author Description April 2016 CoMi Revised and edited in new design Conventions Instructions and results are shown in the following way: �...
Safety and Dangers 4 (22) WARNING This instruction must be followed to avoid a risk of death or serious injury. Safety and Dangers Information on EMC Risk of interference to radio and television if used in office or home environment! Use exclusively included accessories.
Features 5 (22) Features All interfaces (apart from PCIe Mini) are available as standard and low-profile version. Standard version: • 2 Sub-D9 connetors on one slot bracket. Low-profile version: • 1 Sub-D9 connector on one slot bracket • expandable with Sub-D9 connector on second slot bracket Fig.
Features 6 (22) CAN-IB300/400/PCI • PCI CAN-Interface • 5 V and 3.3 V compatible • CAN-IB300/PCI, passive interface • CAN-IB400/PCI, active interface • PCI interface compliant with PCI local bus specification Rev. 2.2 CAN-IB500/600/PCIe and CAN-IB800/PCI Common Features • available with 1 or 2 CAN channels •...
Features 7 (22) CAN-IB120/PCIe Mini and CAN-IB520/PCIe Mini Common features • Single lane (x1) PCI express card • PC interface compliant with PCI express base specification, revision 1.1 • form factor F2: Full-mini with bottom-side keep outs • dimensions according toPCI express Mini Card electromechanical specification, revision 1.2 •...
Install VCI driver (see Installation manual VCI). Linux and Real-Time Operating Systems � Observe information about supported operating systems and interfaces on www.ixxat.com. Install Hardware Risk of ESD damages caused by improper handling! Use ESD protective measures to avoid equipment damage.
Connections 9 (22) Connections Overview Fig. 2 Connections CAN 1 CAN 2 (exclusively in standard version) Fieldbus expansion connector channel 2 (option) Fieldbus expansion connector channel 1 (option) PCI/PCIe connector Expansion board connector (option) Synchronisation connector (option) CAN Bus The bus coupling can optionally be galvanically isolated. With galvanic isolation the shield of the CAN connector is connected to CAN ground through a 1 MΩ...
CAN interfaces and fieldbus expansions. Synchronization Connector (Option) The optional synchronization connector can be used to connect multiple CAN interfaces togeth- er for synchronization (exclusively CAN-IB200/600/PCIe and CAN-IB400/800/PCI). For order number of appropriate cable see www.ixxat.com. PC CAN Interface User Manual 4.01.0230.20000 3.0...
Connections 11 (22) PCIe Mini Fig. 4 Connections PCIe Mini CAN 1, Pin 1 CAN 2, Pin 1 PCIe Mini card connector Pin allocation of CAN connector Pin no. Signal Color CAN High CAN Low Yellow Black The CAN connector type is SM03B-SURS-TF by JST. The counterpart is 03SUR-32S by JST. A pre-assembled open-style cable for each CAN connector is included.
Expansions 12 (22) Expansions Fieldbus expansion Fig. 5 Fieldbus expansion If there is a low-speed CAN transceiver on the fieldbus expansion, it is possible to switch via software between the high-speed CAN transceiver on the interface and the low-speed CAN transceiver on the fieldbus expansion.
Page 15
Make sure expansion is properly inserted in socket. � Interface detects installed expansions automatically. � If expansion is not detected automatically, check if expansion is properly inserted. � Observe product description and further information on www.ixxat.com. PC CAN Interface User Manual 4.01.0230.20000 3.0...
The signals of the additional fieldbuses are applied to the corre- sponding CAN connector. � Observe information about available fieldbus expansions and the compatibility with CAN interfaces on www.ixxat.com. � Install expansion (see Installation, p. 13).
Page 18
Expansions 16 (22) Installation Fig. 9 CAN interface with MultiCAN-PB expansion CAN 1/3 CAN 2/4 MultiCAN-PB Fieldbus expansion connectors � Install expansion (see Installation, p. 13). � Observe different pin allocation of SUB-D9 connector. Pin Allocation Using MultiCAN-PB Pin No. Signal CAN 1/3 Signal CAN 2/4 –Low (High-Speed)
Page 19
Expansions 17 (22) 7.3.2 MultiCAN-PB/LP Fig. 10 CAN interface and CAN expansion board with MultiCAN-PB/LP expansion CAN 1/2 CAN 3/4 MultiCAN-PB/LP Fieldbus expansion connectors If used in conjunction with low profile CAN interfaces the expansion redirects channel CAN 2 to the CAN 1 connector.
Page 20
Expansions 18 (22) Pin Allocation Using MultiCAN-PB/LP Pin No. Signal CAN 1/2 Signal CAN 3/4 –Low (High-Speed) –Low (High-Speed) –Low (High-Speed) –Low (High-Speed) –High (High-Speed) –High (High-Speed) –High (High-Speed) –High (High-Speed) PC CAN Interface User Manual 4.01.0230.20000 3.0...
Technical Data 19 (22) Technical Data PCI/PCIe CAN-Transceiver (Low-Speed): TJA1054, via optional fieldbus expansion LIN-Transceiver TJA1020T, via optional fieldbus expansion K-Line-Transceiver SI9243AEY, via optional fieldbus expansion Operating temperature range 0 °C to +70 °C Storage temperature range -40 °C to +85 °C Galvanic isolation 1 kV for 1 second Relative humidity...
� If required use support phone contacts on www.ixxat.com. Return Hardware � Fill in the form for warranty claims and repair on www.ixxat.com. � Print out the Product Return Number (PRN resp. RMA). � Pack product in a physically- and ESD-safe way, use original packaging if possible.
EMC Compliance (CE) The product is in compliance with the Electromagnetic Compatibility Directive. More information and the Declaration of Conformity is found at www.ixxat.com. FCC Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: �...
Need help?
Do you have a question about the CAN-IB Series and is the answer not in the manual?
Questions and answers