Installation And Setup - Avermedia AverTV Hybrid STB 1080i User Manual

AVerTV Hybrid STB 1080i
The figure below shows the proper cable connections for installing AVerMedia TV Box and connecting it to your
audio/video equipment. Please be noted if your signal input and output are not the same type, there will not
be able to detect the signal normally. Please make sure that your input and output are in the same type
(both DVI or both D-Sub).
1 Earphone or headphone (not supplied)
2 Example:
3 Television
4 Video Game
5 Camcorder
6 VCR/ VCD/ DVD Player
7 IN(INPUT)
8 OUT
9 COMPONENT VIDEO
10 (Red)
11 (White)
1.The Video-Output feature is not available in analog TV.
NOTE
2.AVerTV Hybrid STB 1080i can only support one type of audio output connection at a time. You
can only choose to either connect it to speaker or earphone.
Chapter 3

Installation and Setup

12 (Yellow)
13 Composite Cable (not supplied)
14 S-Video Cable (not supplied)
15 Componet Cable (not supplied)
16 4-Pin MiniDin Connector
17 (Black)
18 (Red)
19 (Blue)
20 (Green)
21 S-Video/Component 2-in-1 Cable
ENG-4