Analog Tv Menu - Avermedia AverTV Hybrid STB 1080i User Manual

OSD Menu
Default
No
Yes
System Info
Product Name:AVerTV Hybrid STB9
Hardware Ver:A215-A
Firmware Ver:10.12.06.01

4.3 Analog TV Menu

On Screen Display
Default
If you do want to revert to the factury settings, choose "YES".
A confirmation dialog will appear. Select "OK" and press OK to confirm
the operation, or select "CANCEL" and press OK.
System Info
Provide the information about this product, such as product name
and firmware version etc.
TV SOURCE
Use the CH▲ or CH▼ buttons to select between antenna TV or cable
TV source, then press Vol►/OK button to make the selection.
CH SCAN
Use CH▲ or CH▼ buttons to select between CH SCAN or All FREQ
SCAN. Press Vol►/OK button to make the selection. If you want to
interrupt or cancel the scanning process, press any button, but this will
only memorize the scanned channel.
These two types of channel-preset functions enable you to memorize all
active channels in your area.
Use the CH SCAN function first. If there are channels missing after
you perform CH SCAN, use ALL FREQ SCAN function and repeat the
searching process.
ALL FREQ SCAN is a very time consuming process. If
the default frequency table already includes all active TV
NOTE
channels in your area, then avoid using the ALL FREQ
SCAN.
ENG-13
Description
Usage
User's Manual