Installation; English - Avermedia AVerTV Volar HD User Manual

Quick Installation Guide
3

Installation

Installing Drivers and the TV Software Utility
After the device is installed properly, turn on the computer. The system will automatically detect
the new device. Simply skip the wizard, and insert the accompanying installation CD to install
the driver and TV software utility simultaneously.
Installing Drivers and the Application in Windows
Center Edition
To install the driver and application, Windows XP MCE users need to exit and switch to
Windows mode if they are in Media Center Edition mode.
1. The "Found New Hardware Wizard" dialog box will appear. Just click Cancel to skip the
Wizard installation procedures.
2. Place the installation CD into the CD-ROM drive.
3. When the installation main screen appears, choose Install AVerTV 3D.
4. Click Next to continue the installation process.
5. Read the license agreement and if you agree to the terms, select "I accept the terms of the
license agreement" and then click Next.
6. Choose Complete to install all the necessary softwares, including AVerTV 3D, DirectX
9.0c and Driver. Then click Next. For advanced users, it is recommended to choose
Custom to select the software you want. To choose a different destination folder, click
Browse.
7. In the "InstallShield Wizard" dialog box, if you are instructed to restart your computer, select
Yes.
8. Then click Finish to complete the installation.
9. For Windows XP MCE users, if you want to use the Media Center as the TV application,
start Media Center and follow the on-screen instruction to complete the configuration.
®
XP / Windows
6

English

®
XP Media